top of page
Squidstat Cycler - Base Model

A versatile, multi-channel battery cycler designed to go beyond conventional charge–discharge testing.

Ideal for high-current research, development, and education requiring flexible electrochemical control.

CY-1X-K10-BM - Left Side View - Close - REMOVEDBACK copy.png
1630-ongoing
Serial Numbers:
2-years
Warranty Period:
CY-1X-K10-BM-CS
Item Number: 
  • Four-channel battery cycler with FRA 

  • Current range: ±5 A max 

  • Voltage scan range: 0-5 V 

  • EIS frequency range: 10 μHz - 10 kHz 

  • Compatible with Windows, MacOS, and Ubuntu via the Squidstat User Interface software and Application Programming Interface 

  • Multiple units can run simultaneously with other Squidstat models 

  • The current range can be increased up to ±20 A by paralleling the channels 

  • Made in USA

Description
made-in-usa-logo-vector.png
20 Business Days ARO
Typical Lead Time:

Galvanostatic Electrochemical Impedance Spectroscopy (GEIS)

Potentiostatic Electrochemical Impedance Spectroscopy (PEIS)

Mott-Schottky (single-frequency and multi-frequency)

Experiments

Battery Capacity

Charge / Discharge (Constant C / Constant V)

Charge / Discharge (Constant R / Constant P)

Chronoamperometry

Chronopotentiometry

Constant Power

Constant Resistance

Cyclic Voltammetry (CV)

Differential Pulse Voltammetry (DPV)​​

Galvanostatic Intermittent Titration Technique (GITT)

Potentiostatic Intermittent Titration Technique (PITT)

Linear Sweep Amperometry

Linear Sweep Voltammetry (LSV)

Normal Pulse Voltammetry

Open Circuit Potential Monitoring

Rotating Ring Disk Electrode (RRDE)

Square Wave Voltammetry

Staircase Voltammetry ​​

DC Experiments

AC Experiments

Output Parameters

DC Parameters

Working Electrode (V)
Working Electrode (mV)
DC Working Electrode (V)
DC Working Electrode (mV)
Counter Electrode (V)
Counter Electrode (mV)
Current (A)
Current (mA)

​DC Current (A)
DC Current (mA)
Working Electrode vs. NHE (V)
Current Density (A/m2)

Current Density (A/cm2)
Power (W)
Cumulative Charge (mAh)
Cumulative Charge (C)

Capacity (mAh)
Energy (Wh)
State of Charge (%)
Depth of Discharge (%)
dQ/dV (mAh/V)
1 / Sqrt(time) (1/√s)
Resistance (Ohm)
No of Cycles

AC Parameters 

Frequency (Hz)
Phase (deg)
|Z| (Ohms)
Z' (Ohms)
-Z'' (Ohms)

Z'' (Ohms)

Amplitude (A)

Amplitude (V)

Amplitude (mV)

Duration of Each Frequency (s)
No of Cycles

THD (%)

Serial ((1/C2)(1/µF2))

Serial ((1/C)(1/µF))

Parallel ((1/C2)(1/µF2))

Parallel ((1/C)(1/µF))

Additional Parameters

Temperature (Deg, °C)

PC Timestamp

UTC Time (s)

Squidstat Cycler BM CY-1X-K10.png
Accuracy Contour Plot (ACP)
Potentiostatic Input/Output
Values
Compliance Voltage
0 - 10 V
Voltage Scan Range
0 - 5 V
Number of Voltage Ranges
1 range [0 - 10 V]
Applied Voltage Accuracy
± 500 µV of setppoint
Applied Voltage Resolution
0.000006% (0.06 ppm) of range, 320 nV min
Measured Voltage Accuracy
± 500 µV Initial, ± 0.015% of measurement per year
Measured Voltage Resolution
0.000006% (0.06 ppm) of range, 320 nV min
Time Resolution
< 100 µs
Rise Time
20 ms Typical (10-90%, 0.5-4.5 V)
Specifications
Galvanostatic Input/Output
Values
Current Range
± 5.0 A per channel
Number of Current Ranges
2 ranges, [5 A, 500 mA]
Applied Current Accuracy
0.1% of range ± 1.50 mA/250 µA
Applied Current Resolution
0.000012% (0.12 ppm) of range, 600 nA/60 nA
Measured Current Accuracy
0.1% of range ± 1.50 mA/250 µA
Measured Current Resolution
0.000012% (0.12 ppm) of range, 600 nA/60 nA
Current Precision Settling Time (Step Change)
< 10 ms to 0.15% typical, load dependent
General Specifications
Values
Channels Per Unit
4
Operating Modes
Pot / Gal / FRA
Cell Connections
4-terminal, power + remote sense
ADC/DAC Resolution
24-bit resolution
Slew Rate (1 kΩ load)
50 V/s (0 V to +1 V)
Shortest DC data recording interval
188 µs
Shortest data hardware sampling interval
16 µs
Floating/Ground Mode
Float only
Input Impedance
1.76 Mohm
Input Bias Current
2.84 µA
Data Backup Memory
No data backup
Temperature Measurement
-55°C to 80°C Thermistor per channel (± 1.25°C accuracy)
Dimension and Weight
23 L x 17 W x 6 H cm, 1 kg
Channel Cable Length
1 m
Computer Interface
USB
Temperature Operating Range
0 to 40 ℃
Min/Max Scan Rate
320 nV/s, 16 V/s with 10 mV sampling
Smallest Pulse Width
1 ms
Smallest Potential Step for Sweep Voltammetry
0.000006% (0.06 ppm) of setpoint/measured, 320 nV min
Square Wave Voltammetry Max Frequency
6 Hz (0 V to +1 V)
Power Supply Requirements
90-264 VAC, 50-60 Hz
Impedance Analyzer
Values
EIS Frequency Range
10 µHz to 10 kHz
AC Frequency Accuracy
0.005% (50 ppm) or better
EIS Amplitude Resolution
24-bit resolution
Potentiostatic EIS Amplitude Resolution
0.000006% (0.06 ppm) of setpoint/measured, 320 nV min
Galvanostatic EIS Amplitude Resolution
0.000012% (0.12 ppm) of range, 600 nA/60 nA
bottom of page