Squidstat Cycler – Base Model Complete Setup (#CY-1X-K10-BM-CS)

Squidstat Cycler - Base Model

$9,500.00

Quantity

Price Per Unit ($USD)	$19,500
Channels Per Unit	4
Operating Modes	Pot / Gal / FRA
Cell Connections	4-terminal, power + remote sense
ADC/DAC Resolution	24-bit resolution
Slew Rate (1 kΩ load)	50 V/s (0 V to +1 V)
Shortest DC data recording interval	188 μs
Shortest data hardware sampling interval	16 μs
Floating/Ground Mode	Ground only
Input Impedance	1.76 Mohm
Input Current	2.84 µA
Data Backup Memory	No data backup
Temperature Measurement	-55°C to 80°C Thermistor per channel (± 1.25°C accuracy)
Dimension and Weight	23 L x 17 W x 6 H cm, 1 kg
Channel Cable Length	1 m
Computer Interface	1 USB per unit
Temperature Operating Range	0 to 40 ℃
Min/Max Scan Rate	320 nV/s, 16 V/s with 10 mV sampling
Smallest Pulse Width	1 ms
Smallest Potential Step for Sweep Voltammetry	0.000006% (0.06 ppm) of setpoint/measured, 320 nV min
Square Wave Voltammetry Max Frequency	6 Hz (0 V to +1 V)
Power Supply Requirements	180 -264 VAC, 47-63 Hz

Compliance Voltage	0 - 10 V
Voltage Scan Range	0 - 5 V
Number of Voltage Ranges	1 range [0 - 10 V]
Applied Voltage Accuracy	± 500 µV of setppoint
Applied Voltage Resolution	0.000006% (0.06 ppm) of range, 320 nV min
Measured Voltage Accuracy	± 500 µV Initial, ± 0.015% of measurement per year
Measured Voltage Resolution	0.000006% (0.06 ppm) of range, 320 nV min
Time Resolution	< 100 μs
Rise Time	20 ms Typical (10-90%, 0.5-4.5 V)

Current Range	± 5.0 A per channel
Number of Current Ranges	2 ranges, [5 A, 500 mA]
Applied Current Accuracy	0.1% of range ± 1.50 mA/250 µA
Applied Current Resolution	0.000012% (0.12 ppm) of range, 600 nA/60 nA
Measured Current Accuracy	0.1% of range ± 1.50 mA/250 µA
Measured Current Resolution	0.000012% (0.12 ppm) of range, 600 nA/60 nA
Current Precision Settling Time (Step Change)	< 10 ms to 0.15% typical, load dependent

Max Source Power with Single Channel in Use	25.0 W Per Channel
Max Sink Power with Single Channel in Use	25.0 W Per Channel
Max Source Power when All Channels in Use (with All Channels Running at Equal Max Power)	25.0 W Per Channel, 100.0 W Per Device
Max Sink Power with All Channels in Use (with All Channels Running at Equal Max Power)	25.0 W Per Channel, 100.0 W Per Device
Idle Power Consumption	4 W

EIS Frequency Range	10 µHz to 10 kHz
AC Frequency Accuracy	0.005% (50 ppm) or better
EIS Amplitude Resolution	24-bit resolution
Potentiostatic EIS Amplitude Resolution	0.000006% (0.06 ppm) of setpoint/measured, 320 nV min
Galvanostatic EIS Amplitude Resolution	0.000012% (0.12 ppm) of range, 600 nA/60 nA

General Specifications